one.A connecting website link of an O-ring Chain for standard application is pre-coated with grease with the pins. Prior to connection, verify the grease within the surfaces of pins, and if the volume of grease is smaller, apply grease with bare hands. (If gloves are utilized, the grease might be absorbed through the gloves.)
Example: When the connecting website link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted in the roots in the pins. Should the O-rings come loose due to vibration in the course of transport, refit the O-rings in to your roots from the pins.
In this instance, make sure you return the grease collected on the roots from the pins on the central surfaces of your pins, extra at portion A than at portions B shown during the above illustration. (Portions A is worn as a consequence of sliding with the bushings.)
2.The chain may be most very easily linked on the teeth of a sprocket. Engage the links at each ends of your chain together with the sprocket teeth and fit connecting pins. In the event the sprocket can be moved, the chain can also be linked about the loosened side.
3. Connecting procedure
one.Verify that O-rings are connected to the roots with the pins.
two.If the quantity of grease utilized over the connecting pins is small, coat the pins with grease with the central portions.
3.Insert the connecting pins to the bushings in the inner back links at each ends.
4.Confirm the grease is applied to the total face in the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins to the connecting plate and when pressing the connecting plate, install the spring clip. Confirm no matter if the head (the end with no split) from the spring clip is turned from the feeding direction from the chain. (See the following illustration.)
6.You should definitely confirm that the spring clip is securely fitted while in the clip grooves from the connecting pins.
This completes jointing on the connecting hyperlink. Note that grease about the surfaces of connecting pins and O-rings is often removed during set up operate. In this instance, re-grease utilizing the grease to the surface in the base chain or even the grease within the polyethylene bag by which the connecting website link was contained.