The 14 sizes of standard roller chains can be found ranging from 25 to 240 such as individuals in conformity with ANSI (American Nationwide Regular Institute), and ISO (Global Organization for Standardization).
The chains not only meet the prerequisites for the minimal tensile Y YD YS Series three-Phase asynchronous Motors strength prescribed by ANSI and ISO, but they also provide the best class top quality during the world which include a substantial fatigue power
Suitable uses
?Common use for driving and lifting products.
Examples
?Driving transfer units together with other products. For multilevel parking.
Selection of chains
For selection of a chain, see the tables of “Max. Horsepower Ratings” for common roller chains and “Designing of Chain 
Transmission”. Having said that, only for a exclusive case of very low velocity and much less shock, “Low-speed selection” strategy also can be referred to.
Common roller chains as much as five strands are available. The regular process for connecting pins and plates is rivet type (RP).
The cotter type (CP) is accessible for common chains and HK chains of 80 or greater.
Sprockets
The normal roller chains is usually engaged with regular sprockets of the corresponding nominal numbers. For sprockets, refer on the table of “Dimensions” for each size of chain.
Connecting back links and offset hyperlinks
For connecting hyperlinks and offset backlinks, refer to your table of “Dimensions” for each dimension of chain.
The connecting hyperlinks are generally R or C connecting backlinks in which the pins are clearance-fitted with the connecting plate. Considering that clearance-fitted links are inferior for the base chain in Max. allowable tension as inside the situation of one-pitch offset hyperlinks (OJ), “Low-speed selection” can’t be referred to. Since the Max. kilowatt ratings are made a decision thinking of the strength of connecting backlinks and OJ, the clearance-fitted connecting links and OJ is usually made use of if the chains are chosen in accordance to the “General selection”. Whenever a higher Max. allowable tension is required for that connecting website link, make use of the interference-fitted connecting link (H connecting link) of a HI-PWR-S chain, and in the situation of offset back links, use 2POJ.
