Outfitted with all the zero leak bidirectional checking sole-noid valves, this power unit is intended for the operation of two independent circuits. Which are respectively for the primary and subordinate platforms of the double scissors lift. Two cut-off valves are utilised for lowering the machine manually in situation of energy loss. If more independent circuits are necessary for your application please contact us for availability.
Remark: 1. Please seek advice from our sales engineer for the distinctive pump displacement, motor electrical power or tank capacity.
two. CSA or UL licensed motors are available on request.
one. The AC motor is of S3 duty cycle, which could only perform intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all the hydraulic components concerned just before installation of the electrical power unit.
3. Viscosity with the oil shoud be 15~46 cst,plus the oil really should be clean and no cost of impurities,N46 hydraulic oil is recommended.
4. The electrical power unit really should be mounted vertically.
five. Check the oil level in the tank soon after the original running on the power unit.
six. Oil shifting is required right after the preliminary one hundred operation hrs,afterwards as soon as every 3000 hours.