We – EPG Team the biggest worm gearbox, couplings and gears factory in China with 5 distinct branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
MY E Series
|Max. Paper Size
|Min. Paper Measurement
|Max. Die-chopping Size
|Max. Wor ept Pressure
|Max. Paper Thickness
- Features of the device:
- The Bobst type reduce construction tends to make the reducing platform movement like a scissor, it will realize a entire and easier cut.
- Main worm gear utilizes alloy copper material, soon after the skilled operator’s handbook scraping remedy and rigid standard screening, it can assures the driving parts ten many years lifestyle.
- The principal chains undertake imported British Renold brand name, the distinctions of 10 chains are significantly less than .2mm.
- The join between gear box and driving shaft adopts sleeve and pin composition ensuring a sturdy relationship.
The equipment adopts frequency controller to accomplish stepless speed acceleration which can reach to 4500 occasions for each hour. Throughout real production, it can normally run at 3600 to 4000 occasions for each hour in accordance to the quality of the board. If the high quality of the paper is good, a good operator even can function the equipment at 4200 instances for every hours without having sensation also hard.
- Basic safety:
As it is proven in the image of the machine, the machine adopts rear portion paper feeding strategy which retains the operator away from the die-chopping element. The mounting and adjustment of the die plate is also carried out exterior of the die-cutting portion with sensors and detectors at die-cutting portion to make sure that the equipment can not be commenced when the die-cutting plate is at adjustment position.
In addition to the sensors at die-slicing component, there are sensor or strategy switches at window component to make the whole device at monitoring position to ensure its protection.
- Operation comfort:
There is Male-device interface installed in the control panel which will exhibits the basic safety status of the machine as nicely as malfunctions to facilitate the operator. Camera is also set up in front of the operator for him/her to keep an eye on the operation position at the shipping and delivery element.
- Main Structures and Essential Content Used
- Four Major Big Components:
They are referring to: base station, relocating platform, upper platform and device wall. The bottom station is created of grey cast iron -HT 200 the shifting system is ductile iron – QT forty two-ten and the machine wall is high quality A3 steel.
- Main Generate:
The eleven KW Siemens Motor together with the pneumatic clutch, worm shaft and worm equipment varieties a shifting set to guarantee secure pressure out set of not much less than three hundred tons.
The content for the worm shaft is 40Cr with quenching remedy and equipment hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is utilized is SKF. The bush is copper alloy ZQSn6-6-3.
- Die-reducing and Creasing Component:
The generate is transferred by means of crank rod to pendulum which will carry the shifting system to shift up and down to get to die-lower and creasing goal.
The pendulum is manufactured of higher high quality ductile iron. The pendulum axis is accomplished by induction harden with floor hardness HRC 43-forty eight. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely stick to the specification of 1080 kind computerized die-slicing and creasing machine. In comparison with computerized die-slicing and creasing equipment which is utilized for cardboard die-reducing, this variety of semi-automatic die-reducing and creasing machine is primarily utilised for corrugated board which wants considerably less strain for die-chopping, in this case really some producers have made smaller width on the pendulum and more compact diameter on the pendulum shaft. We preserve wider pendulum and greater diameter on its shaft to make our equipment final for a longer existence.
The die-cutting plate makes use of 7 mm seventy five Crl plate which has far more hardness and life span than the manganese plate.
- Board Conveying:
It adopts 3-cam intermittent positioning device to make sure the boarding conveying precise and steady.
The device employs gripper bar variety with 12A long joints chain which is considerably less in excess weight and much less shock to the intermittent device below the precondition to ensure the toughness of the chain. The model of the chain is Remold U.K with high specific and top quality. .
The Gripper bar adopts aviation aluminum with three bridge type- mild in weight and high in strength.
- Electric Portion
The electrical elements are created and assembled in accordance to the European CE normal and utilizes globe extensive acknowledged brand name merchandise.
- Set up of Die
The die mounting and dismounting adopts side withdrawing techniques which time conserving and straightforward for operation.
There are two approaches for the fixation of the die-both by bolt or clippers which are subject to customer’s guidance.
The chase loc ept is pneumatic which is straightforward, convenient and reputable.
- Specific People of Our Equipment:
- Clever And Specific Entrance Lay Design:
Compared with the card board sheet, the corrugated board has a lot more energy. If the corrugated board abnormally reaches to the front lay, it will hurt the front lay and the gripper bar when the front lay reaches to its greatest position.
Typically the producers will set up sensors on this portion to cease the machine when the paper is fed abnormally to the entrance lay. Nonetheless, when the device is running at the large speed, the inertia will deliver the machine to operate for a even though to make the front lay to its maximum stage and then also injury the front lay and the gripper bar.
Our specific layout is that when the irregular board feeding happens and currently being detected, the entrance lay can never reaches to its maximum position which makes free from front lay and gripper bar damages since of irregular paper feeding.
As it is our unique layout, so there is no photograph to be demonstrated right here.
- Optional Supply Platform:
According to the requirement of the customer we can do the shipping system possibly square kind or E type (as proven in the photograph) . If the customer has enough pallets, he can pick square type. If the customer does have enough pallet, he can decide on, E kind system for which will also provide 4 shipping and delivery trolleys.
- Pneumatic Preloading and Lifting Step Unit:
The preloading unit is pneumatic pushed. When one paper dimension is set, when you do other pile of preloading, there is no trouble of you to reset the preloading gadget, you can just press the button and the device will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.
- Dancing Roller Feeding:
Fairly some of the die-cutting equipment producers use immediate feeding approach which is the operator will feed the board straight to the mouth of the gripper. What we have identified that the feeding time to the gripper is only .3 seconds which makes the board feeding work hard and inaccurate.
Our equipment makes use of an extra dance roller feeding technique whose board feeding time can be prolong to .6 second. With each other with the conveying components it tends to make an less complicated work of the operator and more quickly in efficiency of the machine.
For example: If an operator operates the direct feeding semi-automatic die-chopping machine at 3300 sheets for each hour, he can easily operate our machine at 3700 – 4000 sheets for every hour.
- Conveying Component:
The board acquired by the dance roller will go through a conveying component with belt conveying and belt pressing which can make the board currently being pressed ahead of achieving to the front lay.
Before the board reaches to the entrance lay, he will be repositioned by the side lay.
By these methods, the board conveyed by the dance roller will be much more correct and steady when they achieve to the gripper bar.
There is also detector to detect the standing of the board. If board does not come to the entrance lay at normal placement, the detector will ship alerts to quit the device.
|Brand and Origin
|IKO Japan or HangZhou, China
|Not key component
|Principal Chain ( Discrepancy of less than .2 mm for per 10 chains of device chain size)
|Other Chain are Choho Japan
|Photograph Electric powered Change
|Motor at feeding and shipping and delivery
/ The use of first equipment manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the listed substitute areas contained herein are not sponsored, approved, or made by the OEM. /