We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
1. HS series slurry pump is designed for the ongoing pumping of high abrasive, substantial density slurries with minimum upkeep needs. The wearing areas are produced of ultra chrome or and rubber. It will preserve substantial performance more than the dress in life of its factors.
two. The metal moist components and rubber types can be interchangeable for handling diverse liquids or slurries.
3. HS slurry pumps are accessible in sizes ranging from 1 inch to 18 inch discharge and attribute high effectiveness efficiency capable of movement prices from ten.8 to 5400 m³/h and heads up to one hundred twenty five meters for large head designs.
Attributes:
1. Cylindrical construction of bearing assembly: handy to adju EPT the space in between impeller and EPT liner
and can beremoved comple tel: +86~13 0571 88828y
two. Interchangeable anti-abrasive damp areas made of substantial-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs give high functioning force capabilities
and an additional evaluate of basic safety.
four. The discharge department can be oriented to any 8 positions at the interval of 45 levels
5. A variety of drive kinds: DC(direct link), V-belt travel, gear box reducer, hydraulic couplings, VFD,
S EPT control, and many others
6. The shaft seal employs the packing seal, expeller seal and mechanical seal
Typical Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Development |
| • Alumina Market | • Electricity Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Power (Kw) |
Inlet & Outlet dimensions (inch) | Materials for Dress in Areas | Circulation Rate (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/one | M | twelve.6~28.eight | 3.5~eight | six~68 | 1200~3800 | 152 |
| R | 10.8~25.2 | 3~7 | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.five | M | 32.4~seventy two | 9~twenty | 6~58 | 1200~3200 | 184 |
| R | twenty five.2~fifty four | 7~fifteen | 5.5~41 | one thousand~2600 | 178 | |||
| 50HS-C | 30 | three/2 | M | 39.6~86.four | eleven~24 | 12~64 | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.4~198 | 24~fifty five | nine~fifty two | one thousand~2200 | 245 |
| R | seventy nine.2~a hundred and eighty | 22~fifty | 5~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | six/4 | M | 162~360 | forty~100 | twelve~fifty six | 800~1550 | 365 |
| R | one hundred forty four~324 | forty~90 | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | eight/six | M | 360~828 | a hundred~230 | 10~sixty one | 500~1140 | 510 |
| R | 324~720 | ninety~200 | 7~49 | four hundred~one thousand | 510 | |||
| 200MS-E | one hundred twenty | 10/eight | M | 666~1440 | 185~four hundred | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | one hundred seventy~380 | 11~61 | 400~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | twelve~50 | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
| R | 720~1620 | 200~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | 13~forty four | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~57 | 200~four hundred | 1370 |
| 25HHS-C | 30 | one.5/1 | M | 16.2~34.2 | four.5~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | 68.4~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | 120 | 6/four | M | 324~720 | ninety~200 | 30~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | eight/6 | M | 468-1008 | one hundred thirty~280 | twenty~94 | 500~1000 | 711 |
For the material of sporting elements,
“M” = steel, ultra chromium alloy “R” = anti-abrasive rubber
Get in touch with
Welcome to speak to us any time for particulars.
Your inquiry will get our prompt attention and reaction !
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic gear manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our organization and the outlined substitute parts contained herein are not sponsored, accepted, or manufactured by the OEM.
