37kw  price  made in China - replacement parts -  in Helsinki Finland  50HP AC Power Two Stage Screw Compressor Design with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Model SGPM-37II
Capacity/Strain(m3/min,/BAR) seven.2/.seven 7.1/.eight 6.3/1. five.4/1.three
Motor Electrical power(KW) 37
Speed(r/min) 2980
Volt(V) 380
Motor safety grade IP54
Electrical Supply 380V/50Hz/3Phase(customizable)
Lubricating oil quantity(L) 30
Outlet Temperature(ºC) ≤ ambient Temperature+15ºC
Driven way Direct Driven
Noise level at 1 meter 68±2dB(A)
Cooled method Air /Water cooling
Oil content <3ppm
Outlet Connection 2 “
Dimension Length(mm) 1900
Width(mm) 1250
Height(mm) 1570
Excess weight(kg)   1900

Introduction of double stage screw air compressor 
Double stage screw air compressor in the primary parts with double screw,the compression approach by the fir EPT stage screw and 2nd screw by way of grading collection compression.
Double screw air compressor in addition to uphold twin-screw compressor has the positive aspects of straightforward composition,versatile installation and higher effectiveness,but also highlights the positive aspects of their own effective,energy-conserving:
1.can decrease the bearing load,improve volume effectiveness,
two.in the case of some load procedure,can enhance efficlency,strength saving.
Double screw air compressor than twin-screw compressor vitality conserving up to fifteen%,every single operate for 8000 hrs a 12 months, Annual personal savings of about 200 thousand yuan electricity.
Gain of two phase screw air compressor 
one. Hierarchical compression to help save compression function
Via the two-phase sequence process, the original single-phase compression process is divided into two compression processes. This kind of a process environment can minimize the ratio of every single single-stage compression procedure, which can successfully lessen the compression and compression of every stage screw. Essential push electricity.
In the method of excellent gas compression, the sum of the electrical power necessary for solitary-phase strain transmission and the energy required for multi-stage compression is equal, but in the true compression approach, because of to a series of elements this sort of as the transmission energy reduction of the coupling, the friction coefficient of the bearing and the viscosity of the coolant With the boost of the applied power, the worthless power exceeding the same ratio is produced, so the useless energy in the true compression process can be lowered by decreasing the compression ratio of every single phase, so that the sum of the electrical power necessary for multi-stage compression is significantly less than that of solitary-phase compression Needed power.
2. The intermediate heat oil coo EPT and minimizes the temperature of the gas entering the following stage. All the fuel compression approach is truly the approach of the friction amongst the gas and the moving components and being compressed by it.
In the presence of friction, the gasoline will rise in temperature owing to friction, and there will inevitably be a development of shadow accounts. This element of energy will be introduced in the sort of power in the fixed volume of air compression by increasing its very own pressure.
The temperature increase of the fuel will increase the pressure of the gasoline alone throughout the compression process and will increase the compression ratio. For that reason, it is necessary to spend added electrical power to drive the gear to shrink the air to the wanted pressure value. Consequently, the two-phase screw compressor is presented with a coolant injection curtain device.



Q1: What is the rotor pace for the air conclude?
A1: 2980rmp.

Q2: What’s your lead time?
A2: usually, 5-7 days. ( EPT orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled kind).

Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One year for the total air compressor(not like the usage spare elements) and technical supports can be provided in accordance to your demands.

Q7: Can you acknowledge EPT orders?
A7: Indeed,  EPT orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

If you have any questions, make sure you never wait to get in touch with us. Many thanks!  

 

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique equipment manufacturer’s (OEM) component quantities or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the shown substitution elements contained herein are not sponsored, accepted, or manufactured by the OEM.

37kw  price  made in China - replacement parts -  in Helsinki Finland  50HP AC Power Two Stage Screw Compressor Design with top quality

37kw  price  made in China - replacement parts -  in Helsinki Finland  50HP AC Power Two Stage Screw Compressor Design with top quality

37kw  price  made in China - replacement parts -  in Helsinki Finland  50HP AC Power Two Stage Screw Compressor Design with top quality